Products

6in submersible motor

Submersible motors 6'' series

series of water filled submersible motors with Encapsulated (canned) stator and rotor for installation in 6'' (150mm or more)diameter wells the motor is supplied pre- filled with a coolant (entirely non –toxic) consisting of a water + propylene glycol mixture with anti-oxidant lubricating ,and antifreeze function( up to -15ᵒC) the thrust bearing unit and the radial bearing are lubricated by the liquid inside while a membrane ensures a variation of the liquid volume as well as pressure compensation. The electric power cable is connected to the motor by means of a watertight removable connector. A mechanical seal together with a special sand – guard ensures operation also in the presence of sandy waters ; a silicon carbide SIC/ SIC seal and a temperature sensor can be fitted as optional.

General Specifications:

• Flange: 6" NEMA

• Insulation class: F

• Degree of protection :IP68

• Rated ambient temp.: 35°C

• Cooling flow min.: 0.3 m/s

• Voltage tolerance :+6% / -10%

• Max starts: 25/h

• Max operating depth :300 m

• Working voltage: 380/415 V

• Axial thrust :16000 N, 27000 N

Download Brochures

6in Submersible Motor

Spotlight
Lorem Ipsum is simply

                                                                         Lorem Ipsum has been the industry's standard dummy text ever since

the 1500s, when an unknown

printer took a galley of type and scrambled it to make a type specimen book.

Lorem Ipsum is simply dummy text of the