Turbine Flow Meters for Pharmaceuticals (HM-TRI)
- Measuring ranges:
0.3 to 400 l/m - Viscosity:
0.1 up to 100 mm²/s - Linearity:
± 1 % of actual value - Pressure:
up to 16 bar - Fluid temperature:
–40 up to +150 °C - Repeatability:
± 0.05%
For sanitary and purity reasons HM…TRI turbines have the following features:
Thread less tube fittings type „Tri-Clamp“as per DIN 32676
Special construction eliminating dead spots
Slide bearing with lateral bores to enable flush processes
Features:
Short response time (> 50 ms)
Dynamic measuring system
Different internal nominal diameters
Non-threaded pipe connections
Pressure: as per DIN 32 676
Design without dead space
Slide bearing of PTFE with possibility of flushing
General Specification | |
---|---|
Measuring ranges | 0.3 to 400 l/m |
Viscosity range | 0.1 up to 100 mm²/s |
Linearity | ± 1% of actual value |
Pressure | Up to 16 Bar |
Repeatability | 0.05 % |
Accuracy | Up to 0.1% |
Material | |
---|---|
Housing |
As per DIN 1.4571 (AISI 316 Ti) |
Internal parts | As per DIN 1.4571 (AISI 316 Ti) |
Wheels | As per DIN 1.4460 (AISI 329) |
Bearings | PTFE |
Medium Temperature | -40 to +150°C (higher temperatures on request) |
Tap and demineralized water
Fuels
Liquefied gases
Pharmaceutical liquids
Fuel oil
Solvents
Hydraulic oil