Pressure Sensors

LIT25 level indicating transmitter

Main Features:

• Non-contacting, temperature compensated ultrasonic sensor

• Remote Display enclosure for keypad calibration without climbing the tank

• 4-20mA output is isolated ready for connection to PLC's or process computers

• Level and Temperature signals share a single cable up to 500 ft (152 m) length

• Optional Intrinsically Safe Sensor and Cable

• Optional Pressure Sensors

• Signal relay is programmable for ON/OFF pump control, level, temperature or echoloss alarm

• 115VAC, 230VAC or 24VDC power input

General Specifications:

• Electronics Enclosure: Watertight, dust tight NEMA4X(IP66)polycarbonate with clear, shatter proof cover

• Accuracy: ±0.25%ofRangeor2mm(0.08"),whichever is greater

• Display: Large(3/4in,19mmhigh) 4digit LCD

• Calibration: Selectable Level or Range mode. Enter min. And max. Distance in inches or cm

• Programming: Built-in2- button keypad with Menu selection. Calibration parameters are permanent when Stored(even through a power interruption)

• Power Input: 100-260VAC50/60Hz,5 watts maximum

• Output: Isolated 4-20mA,1000 ohm load maximum

• Signal Relay: Qty1, rated 120/240VAC or 24VDC, 1ampere, programmable for level alarm, echo loss alarm, pump control or temperature alarm

• Temperature Compensation: Temperature probe inside level sensor for high accuracy in changing temperature

• Electrical Surge Protection: Sensor, 4-20mA and AC power inputOperating

• Temperature(electronics): -13 to 140°F(-25 to 60°C)

• Approximate Shipping Weight: 6lbs. (2.7kg)

Stay in touch

• Email Us

• Send RFQ

• Linkedin

• Facebook

• Twitter

• Youtube

Spotlight

Ultrasonic Level Meter

                                                                        

The same model LIT-25 can opearte on ultrasonic principle as well as pressure.

|

|

|

|

|