Impeller centrifugal pumps

Application:

Impeller centrifugal KS pumps have been designer to pump some acid, lye, hydrocarbon and other chemically active fluids, with hydrogen ionic concentration pH>3.5. With KS pumps it is possible to pump liquids with viscosity up to 200 mm2/s and density up to 1900 kg/m3. The temperature of the fluid cannot exceed 120 ᵒC. Abrasive bodies content (grain size not bigger than 1 mm) should be limited to 50 mg/dm3. Gauge pressure of the fluid at the inlet to the pump most not exceeds 1.0 Mpa.

Technical Data:

• Output Q max:.72m3/h

• Lift h max.:55 m

• Rotation Speed: 1450 rpm (50Hz) and 1800 rpm (60Hz), 2900 rpm (50 Hz) and 3600 rpm (60 Hz)

• Temperature max.:120 OC,

• Shaft sealing: string and face seal

Stay in touch

• Email Us

• Send RFQ

• Linkedin

• Facebook

• Twitter

• Youtube

Spotlight

All type of pumps for Water, O&G
                                                                        

We provide a very wide range of pumps suitable for water, wastewater and O&G.

Contact us for further information.

|

|

|

|

|