DIN Panel mount - Flow rate indicator D010

  • Type​
    High intensity reflective numeric and alphanumeric LCD, UV-resistant.
  • Ambient temperature​
    -40°C to +80°C (-40°F to +176°F).
  • Displayed functions
    Flow rate, Measuring and time units.
Request A Quote

The D010 is a local, panel mount indicator to display the actual flow rate. The measuring and time unit to be displayed are simply selected through an alfa-numerical configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and user friendly solution! The configuration of K-factors or Span and number of decimals is done through software functions, without any sensitive dip-switches or trimmers. 

Display 
Type

High intensity reflective numeric and alphanumeric LCD, UV-resistant.

Dimensions  90 x 40mm (3.5" x 1.6").
Digits 5 1/2 very large 26mm (1") digits. Various symbols and measuring units.
Refresh rate  User definable: fast, 1sec , 3sec, 15sec, 30sec, off.
Operating temperature 
Ambient (Safe areas) -40°C to +80°C (-40°F to +176°F).
Power requirements
Type PB Long life Lithium battery - life-time depends upon settings and configuration - up to 5 years.
Type PD 24V AC/DC ± 10%. Power consumption max. 1 Watt.
Type PL  Input loop powered from sensor signal 4 - 20mA (requires type A).
Type PM  115 - 230V AC ± 10%. Power consumption max. 1 Watt.
Type PX 8 - 30V DC. Power consumption max. 0.3 Watt.
Type ZB 20 - 30V DC. Power consumption max. 1 Watt. With type PD / PM: internally powered.
Sensor excitation
Type PB/PX 

3V DC for pulse signals and 1.2V DC for coil pick-up.

Note This is not a real sensor supply. Only suitable for sensors with a very low power consumption like coils (sine wave) and reed-switches. 
Type PD / PM

for pulse signals: 1.2 / 3 / 8.2 / 12 / 24V DC

For analog signals: 8.2 / 12 / 24V DC

8.2V DC, Iout max. 35mA @ 20°C.

12V DC, Iout max. 50mA @ 20°C.

24V DC, Iout max. 75mA @ 20°C. (this voltage can vary depending on the input supply voltage)

Terminal connections
Type Removable plug-in terminal strip. Wire max. 1.5mm2 and 2.5mm2 .
Data protection
Type EEPROM backup of all settings. Data retention at least 10 years.
Password Configuration settings can be password protected.
Directives & Standards
EMC Directive 2004/108/EC, FCC 47 CFR part 15.
Low voltage  Directive 2006/95/EC.
IP & NEMA  EN 60529 & NEMA 250.

The D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.
The D010 fits in flow measurement applications where a local flow rate indication is required without re-transmission or totalizer functionality.