Fixed Energy Meter For Racks - F709

  • Flow Velocity
    0.01...25 m/s
  • Measuring Functions
    Physical Quantities:  volumetric flow rate, mass flow rate, flow velocity, heat flow (if temperature inputs are installed)
  • Data Logger
    Capacity > 100 000 measured values
  • Fixation
    19 " rack mounting
Request A Quote

FLUXUS® F709 - permanent installation in 19" rack systems

The FLUXUS® F709 is the 19" rack version of the highly versatile FLUXUS F704 liquid flow meter.

Internally identical to the FLUXUS F704, its non-intrusive measurement technology ensures a precise bi-directional, highly dynamic flow measurement over a wide turndown ratio. As the transducers (available also as ATEX and FM approved versions) are mounted on the outside of the pipe wall and are enclosed in the stainless steel VARIOFIXmounting fixtures, the system does not suffer from wear and tear or clogging, can't be a risk for leaks and will not cause any pressure drops inside the pipe. The transmitter itself, as a Rack version, can be situated in a control cabinet at quiet a distance from the actual measurement point and will be connected through junction boxes.

Due to its matched and paired transducers as well as the internal temperature compensation (compliant to ANSI/ASME regulations), the measurement system is drift free and zero stable ensuring highly accurate readings. Moreover, as the transducer calibration data is automatically loaded by connecting the transducer to the transmitter the set-up times are significantly reduced.

Further, with its wide range of electrical inputs and outputs, the FLUXUS F709 flow meter can handle a variety of process parameters within liquid flow metering applications. Input quantities such as temperature and/or pressure can be used by the flow meter, together with the measured flow, for the calculation of further quantities like thermal energy /BTU, mass flow rate, density, etc.

Technical Data:

General Specification
flow velocity

0.01...25 m/s

repeatability  0.15 % of reading ±0.01 m/s

all acoustically conductive liquids with < 10 % gaseous or solid content in volume (transit time difference principle)

Accuracy (volumetric flow rate) 

with standard calibration: ±1.6 % of reading ±0.01 m/s

with advanced calibration (optional): ±1.2 % of reading ±0.01 m/s

with field calibration: ±0.5 % of reading ±0.01 m/s

housing material aluminum 
Transmitter degree of protection IP20
power supply 100...230 V/50...60 Hz or
20...32 V DC
display 2 x 16 characters, dot matrix, backlight
physical quantities volumetric flow rate, mass flow rate, flow velocity,
heat flow (if temperature inputs are installed)
totalizer volume, mass, optional: heat quantity
Data Logger capacity > 100 000 measured values
loggable values all physical quantities, totalized values and diagnostic values
Fixation  19 " rack mounting
Communication Interface

 - process integration (optional): RS485 (emitter) or Modbus RTU or HART or BACnet MS/TP

- diagnosis: RS232

Outputs switchable current output, Current, Voltage, Frequency, binary
Inputs Temperature, Current, Voltage, Binary
Explosion Protection

For Transducer: Zone 1 or Zone 2